(90) inspecting the rubber-lined interior of the capital mold before placement of foam solution
(96) Rubber mold lining for the dentils (which are mounted in the upper curved walls)
November 2000
(B) Casting replicas of the capitals and dentils
|
|
|
(90) inspecting the rubber-lined interior of the capital mold before placement of foam solution |
(91) Releasing the clamps on the outer fibreglass block mold after foam has set | |
|
|
|
| (92) Lifting out the last of the fibre-glass blocks to show the rubber lining | (93) Removing the rubber lining (carefully) to expose the foam casting | |
|
|
|
| (94) Inspecting the foam replica of the original capitals | (95) Plaster dentil replication in preparation for making the rubber mold lining | |
|
||
(96) Rubber mold lining for the dentils (which are mounted in the upper curved walls) |
Back to Main Restoration Progress Page